Aguaplast Universal Pro

USES

• Filling: holes up to 50 mm are easily filled without shrinking or cracking,
• Finishing: provides a fine, smooth and low absorbent finish, which requires no priming before paintwork.
• Renovation: can be directly applied on non absorbent supports such as glass-fiber wall coverings, stippled or other texture acrylic plasters, old coats of satin or oil-based paints, etc.
• Plasterboards: joint filling and finishing, skim coating, plasterboard adhesive…

CHARACTERISTICS

• Superb working and application features: Easy preparation to a lump-free mix. Smooth to apply. Effortless sanding.
• Fast to apply: Allows application of the finishing coat on still wet first rough layer. Dries quickly and homogeneously even in thick layers. Provides a uniform and low absorbent dry coat, thus saving paint.
• Suitable for Mixing Pump machine application.
• Strong adhesion even on painted walls.
• Can be applied in thick layers.
• Classification according to EN 13963: Type 4B Quick Setting Tapeless joint compound for laminated gypsum board joints with round or half-round edge, and for in situ beveled edges to 45º. It may be used for joints treatment with micro-perforated paper tape or mesh.
• Allows finishing plasterboards to any superficial quality level (Q1-Q2-Q3-Q4)*

• Article

  Article no.	Article
  70082-002	Sac 5 kg	140 Sacs / Palet
  70082-001	Sac 15 kg	50 Sacs / Palet